Sprocket
-
IHI30/MM30 Sprocket#Sprocket#Sprocket for mini excavator#Excavator sprocket
This sprocket is used for mini excavator, material is 50Mn or 45SIMN,the hardness is about HRC55-58,KTS factory professional produce high quality excavator parts for many years,special 1-6ton mini-excavator undercarriage parts,not only can be used in steel tracks,also can be used in rubber tracks.
Our products are according to the standard of OEM to manufacture.
-
EX15/IHI15 Sprocket#Mini excavator sprocket#19teeth/9holes/140mm inner diameter
This sprocket is used for mini excavator, material is 50Mn or 45SIMN,the hardness is about HRC55-58,KTS factory professional produce high quality excavator parts for many years,special 1-6ton mini-excavator undercarriage parts,not only can be used in steel tracks,also can be used in rubber tracks.
Our products are according to the standard of OEM to manufacture.
-
EC360 Sprocket#Excavator sprocket#Sprocket#VOLVO sprocket
This sprocket is used for 30T excavator of VOLVO , material is 50Mn or 45SIMN,the hardness is about HRC55-58,having wide choice range,the sprocket is applicable to special model of crawler type excavators and bulldozer from 0.8T-100T,it is widely applied in bulldozers and excavators of Komatsu,Caterpillar,Hitachi,Kobelco,VOLVO,Hyundai,Daewoo etc,adopts precision processing technology and special heat treatment technique,so reach the best wear-resistance and prolong life time to maximum extent.
-
E303CR Sprocket#Excavator sprocket#Sprocket for mini excavator
This sprocket is used for mini excavator, material is 50Mn or 45SIMN,the hardness is about HRC55-58,KTS factory professional produce high quality excavator parts for many years,special 1-6ton mini-excavator undercarriage parts,not only can be used in steel tracks,also can be used in rubber tracks.
Our products are according to the standard of OEM to manufacture.
-
12holes/9holes for E55 Sprocket#Excavator sprocket#Mini excavator sprocket#Sprocket for CATERPILLAR excavator
This sprocket is used for mini excavator of CATERPILLAR , material is 50Mn or 45SIMN,the hardness is about HRC55-58,KTS factory professional produce high quality excavator parts for many years,special 1-6ton mini-excavator undercarriage parts,not only can be used in steel tracks,also can be used in rubber tracks.
Our products are according to the standard of OEM to manufacture.
-
Excavator sprocket#DX500 Sprocket#Sprocket#DOOSAN sprocket
This sprocket is used for 50T excavator of DOOSAN , material is 50Mn or 45SIMN,the hardness is about HRC55-58,having wide choice range,the sprocket is applicable to special model of crawler type excavators and bulldozer from 0.8T-100T,it is widely applied in bulldozers and excavators of Komatsu,Caterpillar,Hitachi,Kobelco,Doosan,VOLVO,Hyundai,Daewoo etc,adopts precision processing technology and special heat treatment technique,so reach the best wear-resistance and prolong life time to maximum extent.
-
DH420 Excavator sprocket#Sprocket#Excavator Sprocket#DAEWOO Sprocket
This sprocket is used for excavator of DAEWOO , material is 50Mn or 45SIMN,the hardness is about HRC55-58,having wide choice range,the sprocket is applicable to special model of crawler type excavators and bulldozer from 0.8T-100T,it is widely applied in bulldozers and excavators of Komatsu,Caterpillar,Hitachi,Kobelco,Doosan,VOLVO,Hyundai,Daewoo etc,adopts precision processing technology and special heat treatment technique,so reach the best wear-resistance and prolong life time to maximum extent.
-
Excavator Sprocket# Bulldozer Sprocket# Sprocket For Huundai
This sprocket is used for HYUNDAI excavator , material is 50Mn or 45SIMN,the hardness is about HRC55-58,the pitch is 171mm,the teeth is 21 teeth,the holes is 21holes,the inner dimension is 364mm,the teeth thickness is 57mm,Our factory can do many kinds sprocket,the pitch ranging from 90mm to 260mm，have regular type and off-centre type,the holes of sprocket have evenly distributed and unevenly distributed.
-
EC360 Sprocket# Excavator sprocket# Sprocket# VOLVO sprocket
This sprocket is used for 30T excavator of VOLVO, material is 50Mn or 45SIMN, the hardness is about HRC55-58, the pitch is 216mm, the teeth is 21teeth, the holes is 24holes, the inner dimension is 450mm.