Excavator Parts
-
PC50/PC55 TRACK ROLLER#BOTTOM ROLLER#KOMATSU EXCAVATOR PARTS#MINI EXCAVATOR PARTS
This track roller is used for mini excavator of KOMATSU ,the roller body material is 40Mn or 50Mn,KTS factory professional produce high quality excavator parts for many years,special 1-6ton mini excavator undercarriage parts,not only can be used in steel tracks,also can be used in rubber tracks.
-
PC15/E18/IHI15J/EX15/U15 TRACK ROLLER#BOTTOM ROLLER#LOWER ROLLER#MINI EXCAVATOR ROLLERS
This track roller is used for mini excavator ,the roller body material is 40Mn or 50Mn,KTS factory professional produce high quality excavator parts for many years,special 1-6ton mini-excavator undercarriage parts,not only can be used in steel tracks,also can be used in rubber tracks.
-
MM45/MM35/MM40 TRACK ROLLER#BOTTOM ROLLER#LOWER ROLLER
This track roller is used for mini excavator of MITSUBISHI,the roller body material is 40Mn or 50Mn,KTS factory professional produce high quality excavator parts for many years,special 1-6ton mini-excavator undercarriage parts,not only can be used in steel tracks,also can be used in rubber tracks.
-
IHI15J TRACK ROLLER#BOTTOM ROLLER#IHISCE ROLLER#LOWER ROLLER#MINI EXCAVATOR ROLLERS
This track roller is used for mini excavator of IHISCE ,the roller body material is 40Mn or 50Mn,KTS factory professional produce high quality excavator parts for many years,special 1-6ton mini-excavator undercarriage parts,not only can be used in steel tracks,also can be used in rubber tracks.
-
9168173 EX300-5,9114682 EX300 TRACK ROLLER#SUPPORT ROLLERS#BOTTOM ROLLER#LOWER ROLLER
The track roller is composed of shell,collar,shaft,seal,O-ring,bushing bronze,plug,lock pin,single flange track roller and double flange track roller is applicable to special model of crawler type excavators and bulldozers from 0.8T to 100T.it is widely applied in bulldozers and excavator of CATERPILLAR、KOMATSU、HITACHI、KOBELCO、YANMAR、KUBOTA、HYUNDAI etc;the design of double-cone sealing and lubrications for life makes the track roller long life and perfect performance under any working condition;hot forging roller shell gains distinguishing inner material fiber flow distribution architecture;differential-type hardening and through-type hardening assure the depth under heat treating and the crack controlling.
The function of the track roller is to convey the weight of excavator to the ground.
When excavator is run on uneven ground,track rollers carry a tremendous impact.
Therefore,the support of track rollers is huge.Moreover,if it is of poor quality and is often dusty,it needs a very good sealing to prevent dirt,sand,and water from damaging it.
Our products are according to the standard of OEM to manufacture.
-
EX70/CLG906/U85 HITACHI excavator parts#TRACK ROLLER#BOTTOM ROLLER
This track roller is used for excavator of HITACHI and KUBOTA ,the roller body material is 40Mn or 50Mn,KTS factory professional produce high quality excavator parts for many years,special 1-6ton mini excavator undercarriage parts,not only can be used in steel tracks,also can be used in rubber tracks,our products are according to the standard of OEM to manufacture.
-
EX30/PC30 TRACK ROLLER#BOTTOM ROLLER#HITACHI UNDERCARRIAGE PARTS#MINI EXCAVATOR PARTS
This track roller is used for mini excavator of HITACHI and KOMATSU ,the roller body material is 40Mn or 50Mn,KTS factory professional produce high quality excavator parts for many years,special 1-6ton mini excavator undercarriage parts,not only can be used in steel tracks,also can be used in rubber tracks.
-
EC290B/EC290BLC/EC290 TRACK ROLLER/BOTTOM ROLLER/LOWER ROLLER
The track roller is composed of shell,collar,shaft,seal,O-ring,bushing bronze,plug,lock pin,single flange track roller and double flange track roller is applicable to special model of crawler type excavators and bulldozers from 0.8T to 100T.it is widely applied in bulldozers and excavator of CATERPILLAR、KOMATSU、HITACHI、KOBELCO、YANMAR、KUBOTA、HYUNDAI etc;the design of double-cone sealing and lubrications for life makes the track roller long life and perfect performance under any working condition;hot forging roller shell gains distinguishing inner material fiber flow distribution architecture;differential-type hardening and through-type hardening assure the depth under heat treating and the crack controlling.
The function of the track roller is to convey the weight of excavator to the ground.
When excavator is run on uneven ground,track rollers carry a tremendous impact.
Therefore,the support of track rollers is huge.Moreover,if it is of poor quality and is often dusty,it needs a very good sealing to prevent dirt,sand,and water from damaging it.
Our products are according to the standard of OEM to manufacture.
-
EC210 High quality track roller#Bottom roller#Lower roller/Track bottom roller
The track roller is composed of shell,collar,shaft,seal,O-ring,bushing bronze,plug,lock pin,single flange track roller and double flange track roller is applicable to special model of crawler type excavators and bulldozers from 0.8T to 100T.it is widely applied in bulldozers and excavator of CATERPILLAR、KOMATSU、HITACHI、KOBELCO、YANMAR、KUBOTA、HYUNDAI etc;the design of double-cone sealing and lubrications for life makes the track roller long life and perfect performance under any working condition;hot forging roller shell gains distinguishing inner material fiber flow distribution architecture;differential-type hardening and through-type hardening assure the depth under heat treating and the crack controlling.
The function of the track roller is to convey the weight of excavator to the ground.
When excavator is run on uneven ground,track rollers carry a tremendous impact.
Therefore,the support of track rollers is huge.Moreover,if it is of poor quality and is often dusty,it needs a very good sealing to prevent dirt,sand,and water from damaging it.
Our products are according to the standard of OEM to manufacture.
-
1175045 CAT320 E320 1175046 CAT325 E325 Friction welding track roller#Track Roller#Bottom Roller
The track roller is composed of shell,collar,shaft,seal,O-ring,bushing bronze,plug,lock pin.
the function of the track roller is to convey the weight of excavator to the ground.
When excavator is run on uneven ground,track rollers carry a tremendous impact.
Therefore,the support of track rollers is huge.Moreover,if it is of poor quality and is often dusty,it needs a very good sealing to prevent dirt,sand,and water from damaging it.
With high quality hardness ware-resisting alloy chrom&molybdenum floating seal and elastic rubber O ring,deep hardnedd wear surface,good quality bronze bushings,steel shaft made by round steel or forging,well lubricated oil recycle system,our products are according to the standard of OEM to manufacture.
-
E306E#TRACK ROLLER#BOTTOM ROLLER#Mini excavator parts#CATERPILLAR
Model：E306E
Brand: KTS
Machine:Mini Hydraulic Excavator
Be suitable for : CATERPILLAR machine
Material: 50Mn/40MnB
Finish: Smooth
Surface Hardness：HRC52-58
Hardness depth: 8-12mm
Install size: 160MM
Technique: Forging,Casting,Maching,Heat Treatment
Warranty: 12months
Supply ability: 2000pcs/per month
Color: Black or Yellow
Place of origin: China
Port: Xiamen port
After warranty service: video technical support; online support
Delivery time: 0-30days
Package: Standard export wooden pallet
-
E303/E303.5/E55/CAT305.5 TRACK ROLLER#BOTTOM ROLLER#MINI EXCAVATOR PARTS#CATERPILLAR undercarriage parts
This track roller is used for mini excavator of HITACHI and KOMATSU ,the roller body material is 40Mn or 50Mn,KTS factory professional produce high quality excavator parts for many years,special 1-6ton mini excavator undercarriage parts,not only can be used in steel tracks,also can be used in rubber tracks,our products are according to the standard of OEM to manufacture.